Packaging parameters:
Product model |
Quantity (sets/carton) |
Package size(cm) |
Package weight (kg/carton) |
M8×110 |
|
|
|
M10×130 |
|
|
|
M12×160 |
|
|
|
M16×190 |
|
|
|
M20×260 |
|
|
|
M24×300 |
|
|
|
M30×380 |
|
|
|
Technical parameters(mm)
Product model |
Drilling diameter |
Drilling depth |
Anchorage thickness(max) |
Substrate thickness(min) |
Screw length |
M8×110 |
10 |
80 |
15 |
140 |
110 |
M10×130 |
12 |
90 |
20 |
160 |
130 |
M12×160 |
14 |
110 |
25 |
210 |
160 |
M16×190 |
18 |
125 |
35 |
210 |
190 |
M20×260 |
25 |
170 |
65 |
340 |
260 |
M24×300 |
28 |
210 |
65 |
370 |
300 |
M30×380 |
35 |
270 |
70 |
540 |
380 |
Design Parameters(KN)
Product model |
M8 |
M10 |
M12 |
M16 |
M20 |
M24 |
M30 |
|
Tensile design reference for C30 non-cracked concrete |
5.8grade |
10.3 |
13.8 |
19.8 |
30.9 |
52.4 |
87.5 |
133.6 |
8.8 grade |
12.4 |
16.8 |
22.9 |
34.5 |
58.8 |
87.5 |
133.6 |
|
A2-70 |
11.8 |
15.3 |
20.8 |
32.3 |
55.8 |
87.5 |
133.6 |
|
A4-80 |
12.4 |
16.8 |
22.9 |
34.5 |
58.8 |
87.5 |
133.6 |
|
Shear design reference for C30 non-cracked concrete |
5.8 grade |
7.3 |
11.5 |
15.5 |
29.5 |
47.5 |
68.5 |
125.3 |
8.8 grade |
9.0 |
14.1 |
20.5 |
37.3 |
59.2 |
86.0 |
139.6 |
|
A2-70 |
8.3 |
13.1 |
19.0 |
32.3 |
55.2 |
82.0 |
139.5 |
|
A4-80 |
9.0 |
14.1 |
20.5 |
37.3 |
59.2 |
86.0 |
139.6 |
|
Tensile design reference for C30 cracked concrete |
5.8 grade |
8.5 |
13.8 |
20.5 |
24.0 |
48.2 |
52.5 |
-- |
8.8 grade |
||||||||
A2-70 |
||||||||
A4-80 |
||||||||
Shear design reference for C30 cracked concrete |
5.8 grade |
7.3 |
11.5 |
15.5 |
39.5 |
47.5 |
68.5 |
125.3 |
8.8 grade |
9.0 |
14.1 |
20.5 |
37.3 |
59.2 |
86.0 |
139.6 |
|
A2-70 |
8.3 |
13.1 |
19.0 |
32.3 |
55.2 |
82.0 |
129.5 |
|
A4-80 |
9.0 |
14.1 |
20.5 |
37.3 |
59.2 |
86.0 |
139.6 |
Operating procedures:
1. Use straight hole drills to drill holes of corresponding diameter and depth
2. Use the soot blower to sweep ash more than 2 times
3. Use a brush to clean hole dust more than 2 times
4. Use the soot blower again to sweep ash until the hole has no dust overflow
5. After injecting adhesive, screw in inverted cone anchor
6. Lift the anchor by 1/3 and screw it in again to complete the anchoring
P.s. The electric hammer, drills, soot blower, brush, caulking gun, injection-type anchor adhesive and mixer will be used during the operation. Jiraw is equipped with brush as standard. Others are purchased on demand.